Cascadia Subduction Zone, One of Earth’s Top Hazards, Comes Into Sharper Focus (2024)

Off the coasts of southern British Columbia, Washington, Oregon and northern California lies a 600 mile-long strip where the Pacific Ocean floor is slowly diving eastward under North America. This area, called the Cascadia Subduction Zone, hosts a megathrust fault, a place where tectonic plates move against each other in a highly dangerous way. The plates can periodically lock up and build stress over wide areas―eventually to be released when they finally lurch against each other. The result: the world’s greatest earthquakes, shaking both seabed and land, and generating tsunamis 100 feet high or more. Such a fault off Japan caused the 2011 f*ckushima nuclear disaster. Similar zones exist off Alaska, Chile and New Zealand, among other places. At Cascadia, big quakes are believed to come roughly every 500 years, give or take a couple hundred. The last occurred in 1700.

Scientists have long been working to understand the Cascadia Subduction Zone’s subterranean structures and mechanics, in order to delineate places most susceptible to quakes, how big they might be and what warning signs they might produce. There is no such thing as predicting an earthquake; rather, scientists try to forecast probabilities of multiple scenarios, hoping to help authorities design building codes and warning systems to minimize the damage when something happens.

A newly published study promises to greatly advance this effort. A research vessel towing an array of the latest geophysical instruments along almost the entire zone has produced the first comprehensive survey of the many complex structures beneath the seafloor. These include the geometry of the down-going ocean plate and overlying sediments, and the makeup of the overriding North American plate. The study was just published in the journal Science Advances.

Cascadia Subduction Zone, One of Earth’s Top Hazards, Comes Into Sharper Focus (1)

“The models currently in use by public agencies were based on a limited set of old, low-quality 1980s-era data,” said Suzanne Carbotte, a marine geophysicist at Lamont-Doherty Earth Observatory, which is part of the Columbia Climate School. “The megathrust has a much more complex geometry than previously assumed. The study provides a new framework for earthquake and tsunami hazard assessment.”

With funding from the U.S. National Science Foundation, the data was gathered during a 41-day cruise in 2021 by Lamont’s research vessel, the Marcus G. Langseth. Researchers aboard the ship penetrated the seafloor with powerful sound pulses and read the echoes, which were then converted into images, somewhat similar to how physicians create interior scans of the human body.

One key finding: the megathrust fault zone is not just one continuous structure, but is divided into at least four segments, each potentially somewhat insulated against movements of the others. Scientists have long debated whether past events, including the 1700 quake, ruptured the entire zone or just part of it—a key question, because the longer the rupture, the bigger the quake.

Cascadia Subduction Zone, One of Earth’s Top Hazards, Comes Into Sharper Focus (2)

The data show that the segments are divided by buried features including big faults, where opposing sides slide against each other perpendicular to the shore. This might help buffer against movement on one segment translating to the next. “We can’t say that this definitely means only single segments will rupture, or that definitely the whole thing will go at once,” said Harold Tobin, a geophysicist at the University of Washington and coauthor of the study. “But this does upgrade evidence that there are segmented ruptures.”

The imagery also suggests the causes of the segmentation: the rigid edge of the overriding North American continental plate is composed of many different kinds of rocks, formed at different times over many tens of millions of years, with some being denser than others. This variety in the continental rocks causes the incoming, more pliable oceanic plate to bend and twist to accommodate differences in overlying pressure. In some places, segments go down at relatively steep angles, in others at shallow ones.

The researchers zeroed in on one segment in particular, which runs from southern Vancouver Island alongside Washington state, more or less ending at the Oregon border. The subterranean topography of other segments is relatively rough, with oceanic features like faults and subducted seamounts rubbing up against the upper plate—features that might erode the upper plate and limit how far any quake may propagate within the segment, thus limiting the quake’s size. In contrast, the Vancouver-Washington segment is quite smooth. This means that it may be more likely to rupture along its entire length at once, making it potentially the most dangerous section.

Also in this segment, the seafloor is subducting under the continental crust at a shallow angle relative to the other segments. In the other segments, most of the earthquake-prone interface between the plates lies offshore, but here the study found the shallow subduction angle means it probably extends directly under Washington’s Olympic Peninsula. This might magnify any shaking on land. “It requires a lot more study, but for places like Tacoma and Seattle, it could mean the difference between alarming and catastrophic,” said Tobin.

With funding from the U.S. Geological Survey, a consortium of state and federal agencies and academic institutions has already been poring over the data since it became available to sort through the implications.

As for tsunami hazard, that is “still a work in progress,” said Kelin Wang, a research scientist at the Geological Survey of Canada who was not involved in the study. Wang’s group is using the data to model features of the seafloor off Vancouver Island that might generate tsunamis. (In general, a tsunami occurs when the deep seafloor moves up or down during a quake, sending a wave to the surface that concentrates its energy and gathers height as it reaches shallower coastal waters.) Wang said his results will go to another group that models tsunamis themselves, and after that to another group that analyzes the hazards on land.

Practical assessments that could affect building codes or other aspects of preparedness may be published as early as next year, say the researchers. “There’s a whole lot more complexity here than was previously inferred,” said Carbotte.

Cascadia Subduction Zone, One of Earth’s Top Hazards, Comes Into Sharper Focus (2024)

FAQs

Cascadia Subduction Zone, One of Earth’s Top Hazards, Comes Into Sharper Focus? ›

Cascadia Subduction Zone, One of Earth's Top Hazards, Comes Into Sharper Focus. Off the coasts of southern British Columbia, Washington, Oregon and northern California lies a 600 mile-long strip where the Pacific Ocean floor is slowly diving eastward under North America.

What are the hazards in the Cascadia subduction zone? ›

Oregon has the potential for a 9.0+ magnitude earthquake caused by the Cascadia Subduction Zone and a resulting tsunami of up to 100 feet in height that will impact the coastal area.

How likely is the Cascadia earthquake to happen? ›

Current data suggest that the Pacific Northwest is overdue for a potentially 9-plus magnitude CSZ earthquake and subsequent tsunami, like those that ravaged Chile in 2010 and Japan in 2011. Scientists say there is a 37 percent chance of a CSZ earthquake of 7 magnitude or higher in the next 50 years.

What is unusual about the Cascadia subduction zone? ›

The CSZ may be unique among the world's subduction zones in that it produces very few (if any) earthquakes unambiguously on the plate interface.

What cities will be affected by the Cascadia earthquake? ›

Coastal Pacific Northwest

Called the Cascadia subduction zone, a big quake along this fault could affect the cities of Seattle, Tacoma, Portland, Eugene, Salem, and Olympia.

Has California ever had a 9.0 earthquake? ›

North Coast

The Cascadia Subduction Zone stretches underneath the Humboldt-Del Norte county region, extending from Cape Mendocino all the way up through the Pacific Northwest. This fault zone is capable of generating a magnitude 9 (or larger) earthquake on average every 500 years. The last such event was in 1700.

How far inland will the Cascadia tsunami go? ›

The waves could be 30-40 feet (9-12 m) in height when they hit the coast but some models suggest they could reach 100 feet (30 m), and in many parts of the coast they would flood up to 10 miles (16 km) inland.

Will the Cascadia earthquake trigger Yellowstone? ›

Definitely no, says Poland. “It is very unusual for an earthquake to trigger volcanic activity. We know this, for one, because in 1959 there was a M7. 2 on the northwest border of Yellowstone and it did not result in a major eruption,” Poland said, referring to the Hebgen Lake earthquake on Aug.

Where is the safest place to live in Oregon from earthquakes? ›

In a recent article by the New York Times, it was said that out of all of the cities in the U.S., Corvallis, OR was the very safest-in terms of avoiding natural disasters. In fact, two of the top 10 in the study were cities in Oregon: Corvallis and Salem.

Could Cascadia trigger San Andreas Fault? ›

A recent technical report, Paleoseismic Record of Peninsula Segment Earthquakes on the San Andreas Fault near San Francisco, CA and possible NSAF linkage to Cascadia, from the National Earthquake Hazards Reduction Program (NEHRP) concludes: Cascadia triggers the Northern San Andreas fault (not the other way around).

How long does a 9.0 earthquake last? ›

It is capable of producing 9.0+ magnitude earthquakes and tsunamis that could reach 30 m (98 ft). The Oregon Department of Emergency Management estimates shaking would last 5–7 minutes along the coast, with strength and intensity decreasing further from the epicenter.

Will there be warning before the Cascadia earthquake? ›

There was no earthquake or other warning, and it would be almost 300 years before scientists and historians identified the source of this "orphan tsunami" as an estimated magnitude 9.0 Cascadia subduction zone earthquake.

What will happen to Oregon when the Big One hits? ›

She explained many of Oregon's buildings will collapse immediately when the earthquake strikes. According to Oregon.gov, “With the current preparedness levels of Oregon, we can anticipate being without services and assistance for at least two weeks, if not longer, when the CSZ earthquake occurs.”

Where in the USA is the greatest chance of earthquake damage? ›

Since the last version for the contiguous U.S. was released in 2018, researchers have found greater risks of damaging quakes in California and Alaska, as well as parts of the northeast, like Philadelphia, Boston, New York, and Washington, D.C. Hawaii is also listed as having a higher chance at damaging shaking because ...

What would a 9.0 earthquake do to Portland, Oregon? ›

If a magnitude 9.0 earthquake were to strike along the Cascadia Subduction Zone at 2 a.m., there would be between 4,400 and 10,400 casualties, ranging from minor injuries to fatalities. Between 9 and 14 percent of the buildings in the area, which number more than 600,000, would be lost.

What would a 9.0 earthquake be like? ›

The effects of these earthquakes include strong ground shaking that goes on for several minutes, subsidence and/or uplift of coastal areas, liquefaction, and tsunami. Aftershocks will be both strong and numerous (possibly M7 or higher).

What is the hazard of subduction zone? ›

What makes subduction zones so hazardous? The most powerful earthquakes, tsunamis, volcanic eruptions, and landslides occur in subduction zones where tectonic plates collide and one plate is thrust beneath another.

What would happen if the Cascadia subduction zone rupture? ›

According to the CREW scenario, the number of deaths could exceed 10,000, more than 30,000 people could be injured, and economic losses could approximate $70 billion for Washington, Oregon, and California alone.

What were the effects of the Cascadia earthquake? ›

Earthquake deaths ranging from 650 to 5,000, with another 600 to 5,000 deaths due to the tsunami. 24,000 buildings completely destroyed, and another 85,000 with extensive damage requiring months to years of repair. 27,600 displaced households.

What type of fault is the Cascadia subduction zone? ›

This area, called the Cascadia Subduction Zone, hosts a megathrust fault, a place where tectonic plates move against each other in a highly dangerous way. The plates can periodically lock up and build stress over wide areas -- eventually to be released when they finally lurch against each other.

Top Articles
Latest Posts
Article information

Author: Geoffrey Lueilwitz

Last Updated:

Views: 6045

Rating: 5 / 5 (80 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Geoffrey Lueilwitz

Birthday: 1997-03-23

Address: 74183 Thomas Course, Port Micheal, OK 55446-1529

Phone: +13408645881558

Job: Global Representative

Hobby: Sailing, Vehicle restoration, Rowing, Ghost hunting, Scrapbooking, Rugby, Board sports

Introduction: My name is Geoffrey Lueilwitz, I am a zealous, encouraging, sparkling, enchanting, graceful, faithful, nice person who loves writing and wants to share my knowledge and understanding with you.